HP-UX Logical Volume Manager (LVM) Commands with an Example

In this post, You can get an idea about HP-UX logical volume manager commands with an example. As you know LVM is basically used for disk management in operating system that allow to manager the physical disks and logical volume.

Please find the below HP-UX LVM commands with an example.

1. Create a new volume group, logical volume and file system:

You can used the below command in HP-UX operating system to create a new volume group, logical volume and file system.

hpx:/>pvcreate /dev/rdsk/c2t1d0

For creating a new volume group first we need to create physical volume as describe in above command.

hpx:/>mkdir /dev/vg01

hpx:/>mknod /dev/vg01/group c 64 0x010000

In above step we will create a directory where we need to create a volume group.

hpx:/>vgcreate /dev/vg01 /dev/dsk/c2t1d0

After successfully creation of volume group we will create a new logical voulme as describe in below command.

hpx:/>lvcreate -L 2048 /dev/vg01

hpx:/>newfs -F vxfs -o largefiles /dev/vg01/vgvol1

Using above command we create a new file system now in next step we will create a directory where we need to mount the newly created file system.

hpx:/>mkdir /backup

hpx:/>mount /dev/vg01/vgvol1 /backup

Once you mount the logical voulme with file system you can run the file system checking command to verify that mounting is succesfully or not.

2. Create a stripped filesystem:

In this, we will create a stripped file system with the help of volume group and logical voulme.

hpx:/>lvcreate -i 2 -I 32 -L 48 -n vgvol1 /dev/vg01

-i number of stripes

-I stripe size of 32KB

-L size of the volume

3. HP-UX display boot information:

You can use the below command to display boot information.

hpx:/>lvlnboot -v /dev/vg00

Boot Definitions for Volume Group /dev/vg00:

Physical Volumes belonging in Root Volume Group:

        /dev/dsk/c2t0d0 (0/1/1/0.0.0) -- Boot Disk

        /dev/dsk/c2t1d0 (0/1/1/0.1.0) -- Boot Disk

Boot: lvol1     on:     /dev/dsk/c2t0d0

                        /dev/dsk/c2t1d0

Root: lvol3     on:     /dev/dsk/c2t0d0

                        /dev/dsk/c2t1d0

Swap: lvol2     on:     /dev/dsk/c2t0d0

                        /dev/dsk/c2t1d0

Dump: lvol2     on:     /dev/dsk/c2t0d0, 0

When you run the above command you can find the above output , if you see the boot information you can find you have two disk which is available for boot.

4. HP-UX display all disks system information:

hpx:/> ioscan -funC disk

Class     I  H/W Path        Driver   S/W State   H/W Type     Description

==============================================================

disk      0  0/0/2/0.0.0.0   sdisk    CLAIMED     DEVICE       TEAC    DV-28E-N

                            /dev/dsk/c0t0d0   /dev/rdsk/c0t0d0

disk      1  0/1/1/0.0.0     sdisk    CLAIMED     DEVICE       HP 146 GMAX3147NC

                            /dev/dsk/c2t0d0   /dev/rdsk/c2t0d0

disk      2  0/1/1/0.1.0     sdisk    CLAIMED     DEVICE       HP 146 GMAX3147NC

                            /dev/dsk/c2t1d0   /dev/rdsk/c2t1d0

In the above output you can found the all the disk which is available in the system.

5. HP-UX display dump devices:

hpx:/> lvlnboot -v

Normally it is showing the boot information in which you can check the dump devices name.