HP-UX Logical Volume Manager (LVM) Commands with an Example

In this post, You can get an idea about HP-UX logical volume manager commands with an example. As you know LVM is basically used for disk management in operating system that allow to manager the physical disks and logical volume.

Please find the below HP-UX LVM commands with an example.

1. Create a new volume group, logical volume and file system:

You can used the below command in HP-UX operating system to create a new volume group, logical volume and file system.

hpx:/>pvcreate /dev/rdsk/c2t1d0

For creating a new volume group first we need to create physical volume as describe in above command.

hpx:/>mkdir /dev/vg01

hpx:/>mknod /dev/vg01/group c 64 0x010000

In above step we will create a directory where we need to create a volume group.

hpx:/>vgcreate /dev/vg01 /dev/dsk/c2t1d0

After successfully creation of volume group we will create a new logical voulme as describe in below command.

hpx:/>lvcreate -L 2048 /dev/vg01

hpx:/>newfs -F vxfs -o largefiles /dev/vg01/vgvol1

Using above command we create a new file system now in next step we will create a directory where we need to mount the newly created file system.

hpx:/>mkdir /backup

hpx:/>mount /dev/vg01/vgvol1 /backup

Once you mount the logical voulme with file system you can run the file system checking command to verify that mounting is succesfully or not.

2. Create a stripped filesystem:

In this, we will create a stripped file system with the help of volume group and logical voulme.

hpx:/>lvcreate -i 2 -I 32 -L 48 -n vgvol1 /dev/vg01

-i number of stripes

-I stripe size of 32KB

-L size of the volume

3. HP-UX display boot information:

You can use the below command to display boot information.

hpx:/>lvlnboot -v /dev/vg00

Boot Definitions for Volume Group /dev/vg00:

Physical Volumes belonging in Root Volume Group:

        /dev/dsk/c2t0d0 (0/1/1/0.0.0) -- Boot Disk

        /dev/dsk/c2t1d0 (0/1/1/0.1.0) -- Boot Disk

Boot: lvol1     on:     /dev/dsk/c2t0d0

                        /dev/dsk/c2t1d0

Root: lvol3     on:     /dev/dsk/c2t0d0

                        /dev/dsk/c2t1d0

Swap: lvol2     on:     /dev/dsk/c2t0d0

                        /dev/dsk/c2t1d0

Dump: lvol2     on:     /dev/dsk/c2t0d0, 0

When you run the above command you can find the above output , if you see the boot information you can find you have two disk which is available for boot.

4. HP-UX display all disks system information:

hpx:/> ioscan -funC disk

Class     I  H/W Path        Driver   S/W State   H/W Type     Description

==============================================================

disk      0  0/0/2/0.0.0.0   sdisk    CLAIMED     DEVICE       TEAC    DV-28E-N

                            /dev/dsk/c0t0d0   /dev/rdsk/c0t0d0

disk      1  0/1/1/0.0.0     sdisk    CLAIMED     DEVICE       HP 146 GMAX3147NC

                            /dev/dsk/c2t0d0   /dev/rdsk/c2t0d0

disk      2  0/1/1/0.1.0     sdisk    CLAIMED     DEVICE       HP 146 GMAX3147NC

                            /dev/dsk/c2t1d0   /dev/rdsk/c2t1d0

In the above output you can found the all the disk which is available in the system.

5. HP-UX display dump devices:

hpx:/> lvlnboot -v

Normally it is showing the boot information in which you can check the dump devices name.

Solaris Processes Monitoring - prstat

In this post, I will explain you which commands is used for display the Solaris zone process information.

Using "prstat" command we can display the solaris zone process information. This command generate the reports information about the processes and zones.

The prstat statistics utility shows a summary of the processes that are using system resources currently. The prstat utility summarizes this information for an every 5 seconds by default and reports the statistics for that period.

Display the zones process informtion:

[sun]# prstat -Z

 PID USERNAME  SIZE   RSS STATE   PRI NICE      TIME  CPU PROCESS/NLWP

 18638 20159    2118M 1502M cpu43    10    0   0:00:44 2.4% oracle/7

 20927 24076    8784K 8136K cpu127    0    2   0:00:17 1.8% prstat/1

   897 24865     916M  512M sleep    59    0  27:52:32 0.7% java/95

 17511 26055     599M  285M sleep    59    0  35:08:33 0.6% java/115

 12540 26055     951M  341M sleep    59    0  31:00:01 0.5% java/101

 ZONEID    NPROC  SWAP   RSS MEMORY      TIME  CPU ZONE

     8     3427   73G   27G    21%  44:01:48 2.8% sunz01

     0      100  465M  132M   0.1% 507:26:46 2.6% global

     6     4056   86G   32G    25%  35:23:30 2.3% sunz02    

Total: 13382 processes, 36594 lwps, load averages: 9.11, 9.27, 9.47

Using above command "prstat -Z" we can monitor the server process utilization in every 5 second. This command is show you the global zone & their local zone process utilization only.

If you want to only specific zone process utilization then you can use the below command.

[sun]# prstat -z sun01

This command output show you only process utilization of specific zone only.

Note:

-Z Reports information about processes and zones.

-z Reports information about a particular zone.

You can use the below syntax to monitor the Global zone as well as only specific zone.

Sun Solaris zonecfg commands

In the last post, I had explained the usage of zoneadm command for Solaris servers, now in this post we will get the information about the "zonecfg" command. 

This is very useful command which is mostly used during configuration of new zone or installed zone as well as for removal of any zone configuration files.

1. Command for creating a Solaris zone:

Please find the below commands to creating a zone on Sun Solaris server. The command must be run on Global zone with root user.

[sun]#zonecfg -z <zone>

Example: [sun]#zonecfg -z sunz01

Once you run the above command, you can enter in the configuration file, where you can add or edit the configuration for the zone.

2. Command for deleting a Solaris zone:

Please find the below command to deleting a Solaris zone from Global zone.

[sun]#zonecfg -z <zone> delete -F

Example: [sun]#zonecfg -z sunz01 delete -F

using above command you can delete or remove the configuration file of solaris local zone.

Note: You need to shutdown and uninstall the local zone before deleting the configuration files of Sun Solaris local zone.

3. Command for display zone current configuration:

Please find the below command to display the current configuration of local Solaris zones.

[sun]#zonecfg -z <zone> info

Example: [sun]#zonecfg -z sunz01 info

This command output show you the zonename, zonepath, autoboot etc attributes information of the solaris zone.

4. Command for zone creation file:

Please find the below command to create a solaris zone creation file.

[sun]#zonecfg -z <zone> export

Example: [sun]#zonecfg -z sunz0 export

Once the creation file has been export you can use this file to another zone creation as well as for restoration of this local zone if any problem occur on this zone.

How to use zoneadm command in Solaris Servers

When you are working on the Solaris operating system then you must aware about this command "zoneadm" which is basic command in Solaris operating system. In this post I would like to explain you how to use the zoneadm command in Solaris servers.

"zoneadm" command are used for verification, installation, boot or viewing of the local zones which are created on the Solaris Server. Please find the below syntax with an example.

1. Verify a Solaris zone:

To verify the local solaris zone you need to run the below command with syntax.

[sun]#zoneadm -z <zone> verify

Example: [sun]#zoneadm -z sunz01 verify

In this example once you run the above command, if your zone is installed properly without any error then this is not showing you any output, that's means it is verified. After running the command if it is showing a message then you need to check the configuration of this zone.

2. Installing a Solaris zone:

To install the local Solaris zone you need to run the below command with syntax.

[sun]#zoneadm -z <zone> install

Example: [sun]#zoneadm -z sunz01 install

In this example when you run the above command then your local zone has been started for installation. It is installed the local zone using the Solaris repostiory or flar images which you are kept at server location.

3. Ready a Solaris zone:

To move the local zone in ready or maintainance state you need to run the below command.

[sun]#zoneadm -z <zone> ready

Example: [sun]#zoneadm -z sunz01 ready

In this example, when we run the above command then your local zone moved in to ready or maintianance state.

4. Boot a Solaris zone:

To boot the solaris zone on global system, you need to run the below command with syantx.

[sun]#zoneadm -z <zone> boot

Example: [sun]#zoneadm -z sunz01 boot

After running the above command your local solaris zone has been boot successfully if it is not showing any error during boot time. If you see any message during the boot time then please check where is the issue.

5. Reboot a Solaris zone:

To reboot or restart the solaris zone on Solaris server, you need to perform the below command on global zone.

[sun]#zoneadm -z <zone> reboot

Example: [sun]#zoneadm -z sunz01 reboot

Using this command the local zone "sunz01" has been restart again successfully. You need to run this command from global zone only.

6. Shutdown/Halt a Solaris zone:

If you want to shutdown or halt your local zone without login it, then you need to run the below command from global zone.

[sun]#zoneadm -z <zone> halt

Example: [sun]#zoneadm -z sunz01 halt

After running this command local solaris zone state change from running to installed state that's means your server is shutdown now.

7. Uninstall a Solaris zone:

If you want to uninstall any solaris zone then you need to run the below command for uninstall the zone.

[sun]#zoneadm -z <zone> uninstall -F

Example: [sun]#zoneadm -z sunz01 uninstall -F

"-F" syntax is used to uninstall the zone forcefully. 

8. Viewing a Solaris zone:

if you want to local zone current status and any other display information you need to run the below command. 

[sun]#zoneadm list -icv

 ID NAME       STATUS      PATH               BRAND   IP

   0 global         running        /                        solaris      shared

   1 sunz01        running       /zones/sunz01   solaris      excl

   2 sunz02        running       /zones/sunz02   solaris      excl

Using above command you can check the current status of all installed zones on Solaris server. It is show you the zone path and zone information. All the above command you need to run from Global zone with root privileges.

10 Practical Examples of RPM Commands in Linux

In this post, I will explain you the usage of RPM (Red Hat Package Manager) command with an example. RPM commands are widely used in Linux operating system to install, remove or update the packages on operating system.

RPM (Red Hat Package Manager) is a default open source and package management utlity which is widely used on Redhat, CentOS linux operating system. You can install , remove, upgrade the packages using this commnad. In this post We will explain each syntax with an example so you can understand how this command is very useful on linux operating system. So here, we will explain best 20 example which is related to Red Hat Package Manager.

1. How to Check an RPM Signature Package:

This command with syntax is used for to check the PGP signature of packages before installing them on your Linux systems and make sure its integrity and origin is fine.

[root@locahost]# rpm --checksig vsftpd-2.2.2-14.el6.x86_64.rpm

vsftpd-2.2.2-14.el6.x86_64.rpm: rsa sha1 (md5) pgp md5 OK

2. How to Install an RPM Package:

Using below syntax you can install the rpm packages on the linux system.

[root@localhost]# rpm -ivh vsftpd-2.2.2-14.el6.x86_64.rpm

Preparing...               ########################################### [100%]

1:vsftpd                    ########################################### [100%]

On the above syantx we are using "-i" option to install the rpm packages on Linux operating system.

3. How to check dependencies of RPM Package before Installing:

If you want to check which packages or dependency is required for RPM packages then you can run the below command to check the dependency.

[root@localhost]# rpm -qpR samba-winbind-3.6.23-12.el6.x86_64.rpm

Here, you can find the syantx meaning of the above command.

-q : Query a package.

-p : List capabilities this package provides.

-R: List capabilities on which this package depends.

4. How to Install a RPM Package Without Dependencies:

If you want to install the packages without any dependency please use the below syntax.

[root@localhost]# rpm -ivh --nodeps samba-winbind-3.6.23-12.el6.x86_64.rpm

Preparing...                       ########################################### [100%]

1:Samba-winbind             ########################################### [100%]

The above command forcefully install rpm package by ignoring dependencies errors, but if those dependency files are missing, then the program will not work at all, until you install them.

5. How to check an Installed RPM Package:

If you want to check which RPM package is installed on the operating system then please use -q option with package name.

[root@localhost]# rpm -q samba

package samba is not installed

If you see the samba packages is not installed on my system so it is show you this message.

[root@localhost]# rpm -q vsftpd

vsftpd-2.2.2-14.el6.x86_64

You can see the above ftp server packages is installed on the system.

6. How to Upgrade a RPM Package:

If you want to upgrade any RPM packages then please use "-U" syntax with rpm name.

[root@localhost]# rpm -Uvh vsftpd-3.0.2-11.el6.x86_64.rpm

Preparing...             ########################################### [100%]

1:vsftpd                 ########################################### [100%]

If you see the above example the packages is upgrade with the new version of vsftpd.

7. How to Remove a RPM Package:

If you want to uninstall or remove the package from the server then please use "-e" erase option is used to remove package.

[root@localhost]# rpm -evv vsftpd

Using above command we can remove the packages with all dependency.

8. How to Remove an RPM Package Without Dependencies:

If you want to remove installed packages without any dependecy then use the below syntax to remove the rpm.

[root@localhost]# rpm -ev --nodeps vsftpd

Using above syntax "--nodeps" we can remove the packages without dependency.

9. How to Import an RPM GPG key:

If you want to import the RPM GPG key then please verify RHEL/CentOS/Fedora packages, you must import the GPG key.

[root@localhost]# rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6

So using above syantx we can import the GPG key on the server.

10. How to List all Imported RPM GPG keys:

To print all the imported GPG keys in your system, use the following command.

[root@localhost]# rpm -qa gpg-pubkey*

gpg-pubkey-0608b895-4bd22942

gpg-pubkey-7fac5991-4615767f

You can see the above entry these are the GPG key which is installed on the server.

Step by Step Configuration of NTP Server on HP-UX Server

In this post, I would like to explain how we configure the NTP (network time protocol) server on HP-UX operating system server. In my recent post you can found the NTP configuration on Solaris and AIX platform. 

As you know NTP ( Network time Protocol) is one of the oldest internet protocol still in use and it allows the synchronization of computer clocks distributing UTC (Coordinated Universal Time) over the network. It is basaiclly used for time synchronization on Unix servers.

Step by Step Configuration of NTP Server on HP-UX:

1. In the first step we will check the configuration files of "xntpd" daemon. By default the configuration file for this daemon is "/etc/rc.config.d/netdaemons".

# vi /etc/rc.config.d/netdaemons

######################################

# xntp configuration.  See xntpd(1m) #

######################################

#

#  Time synchronization daemon

#

# NTPDATE_SERVER: name of trusted timeserver to synchronize with at boot

# (default is rootserver for diskess clients)

# XNTPD:        Set to 1 to start xntpd (0 to not run xntpd)

# XNTPD_ARGS:  command line arguments for xntpd

#

# Also, see the /etc/ntp.conf and /etc/ntp.keys file for additional

# configuration.

#

export NTPDATE_SERVER=

export XNTPD=0

export XNTPD_ARGS=

This is default configuration entry of this file so for xntpd daemon we need to change the variable which is defined.

export NTPDATE_SERVER='ntp.in.pool.org'

export XNTPD=1

export XNTPD_ARGS=

Note: You must change the NTPDATE server name.

2. For ntp config please set the correct timezone is setup in /etc/TIMEZONE file.

hpx:/> cat /etc/TIMEZONE

TZ=IST-5:30

export TZ

You can edit the file in vi editor and change the time zone as per your location.

3. Now, we need to make some changes in NTP configuration files. 

hpx29:/> cat /etc/ntp.conf

#Configuration NTP des serveurs

server ntp.in.org.com

server ntpin.in.org.com

You need to replace ntp server name accordingly. In my post I will use dummy server name.

4. After setting the NTP server name we need to restart the NTP service on HP-UX operating system and verify the ntp configuration.

hpx:/> /sbin/init.d/xntpd restart

hpx:/> ntpq -p

If it is showing you correct ntp server information now. You can match these information with the NTP server name which we use in above step.

How to configure NTP Server on AIX Operating system

In the last post, I had explained the NTP (Network Time Protocol) on Solaris 10 & 11 server. Now in this post, I will explain the same NTP server and client configuration for AIX operating system.

As you know NTP ( Network time Protocol) is one of the oldest internet protocol still in use and it allows the synchronization of computer clocks distributing UTC (Coordinated Universal Time) over the network.

Step by Step Configuration of NTP:

1. In the initial step we must verify that we have check the available NTP server on AIX server. For this please run the below command.

AIX:/>lssrc -ls xntpd

-----------------------------------------------

 Program name:    /usr/sbin/xntpd

 Version:         3

 Leap indicator:  00 (No leap second today.)

 Sys peer:        ntp.aix.in.com

 Sys stratum:     4

 Sys precision:   -18

 Debug/Tracing:   DISABLED

 Root distance:   0.014709

 Root dispersion: 0.066422

 Reference ID:    192.168.1.22

 Reference time:  dc721077.d3a8e000  Tue, Mar 14 2017  7:47:19.826

 Broadcast delay: 0.003906 (sec)

 Auth delay:      0.000122 (sec)

 System flags:    pll monitor filegen

 System uptime:   19248381 (sec)

 Clock stability: 0.000107 (sec)

 Clock frequency: 0.000000 (sec)

 Peer: ntp.aix.in.com

      flags: (configured)(sys peer)

      stratum:  3, version: 3

      our mode: client, his mode: server

 Peer: ntpuk.aix.in.com

      flags: (configured)(sys peer)

      stratum:  3, version: 3

      our mode: client, his mode: server

Subsystem         Group            PID          Status

xntpd            tcpip            8520514      active

------------------------------------------------------

You can found the above output once you run the above command to check the available NTP server. On my AIX machine if you see the sys peer should show a valid server (ntp.aix.in.com). If the server is not showing any ntp server then we need to correct it by adding a server line into /etc/ntp.conf and will take restart of "xntpd" services.

Note : In this post I will use my dummy NTP name instead of real NTP server because of security reason.

2. As your NTP server is not configured and it is show "insame" then you need to add manual entry on the NTP configuration file.

AIX:/>vi /etc/ntp.conf

server ntp.aix.in.com

server ntpuk.aix.in.com

Once you added these ntp server entry manually on the configuration file then please take a restart of NTP services.

AIX:/>stopsrc -s xntpd

AIX:/>startsrc -s xntpd

Using above command we can stop and start the "xntpd" service on AIX operating system.

3. In this step you need to again verify the status of newly added NTP server.

AIX:/>lssrc -ls xntpd

It is taking some time that time because it synchronize process is running. Once the synchronization has been complete and you run the above command you can found the NTP server entry as describe in Step 1.

Step by Step configuration of NTP Client:

1. On the client machine you need to again verify that you have a server suitable for synchronization or not. For this please run the below command.

AIX:/>ntpdate -d ntp.aix.in.com

-----------------------------------------------------------

14 Mar 08:16:21 ntpdate[64356890]: 3.4y

transmit(192.168.1.22)

receive(192.168.1.22)

transmit(192.168.1.22)

receive(192.168.1.22)

transmit(192.168.1.22)

transmit(192.168.1.22)

transmit(192.168.1.22)

server 192.168.1.22, port 123

stratum 16, precision -6, leap 11, trust 000

refid [63.15.23.11], delay 0.03688, dispersion 24.00334

transmitted 4, in filter 4

reference time:      00000000.00000000  Thu, Feb  7 2036  7:28:16.000

originate timestamp: dc721745.3ff1b000  Tue, Mar 14 2017  8:16:21.249

transmit timestamp:  dc721746.3d08a000  Tue, Mar 14 2017  8:16:22.238

filter delay:  0.03688  0.05624  0.00000  0.00000

               0.00000  0.00000  0.00000  0.00000

filter offset: -0.00081 -0.00750 0.000000 0.000000

               0.000000 0.000000 0.000000 0.000000

delay 0.03688, dispersion 24.00334

offset -0.000812

14 Mar 08:16:23 ntpdate[64356890]: no server suitable for synchronization found

--------------------------------------------------------------------------

If you get the message ," no server suitable for synchronization found", verify xntpd is running on the server also verify that no firewalls are blocking port 123.

2. If the no server suitable for synchronization then you must specify the xntpd server in /etc/ntp.conf.

AIX:/>vi /etc/ntp.conf

server ntp.aix.in.com

Once you added the NTP server entry on client configuration file then restart the "xntpd" service again.

AIX:/>startsrc -s xntpd

3. If you want to start the xntpd service on boot time then you need to uncomment the below lines on the configuration file.

AIX:/>vi /etc/rc.tcpip

Unconmment the following line

start /usr/sbin/xntpd "$src-running"

4. Now verify the NTP server on client machine has been synchronized or not. Please use the same command which we used for checking the status.

AIX:/>lssrsc -ls xntpd

This time on the NTP client machine sys peer should display the IP Address or name of your "xntpd" server. As you know it is taking some time to synchronization so you must wait for time.